Prices include VAT & Delivery

The “SD” hinge down steel 60-minute fire rated loft access hatch has a simplistic design for the contemporary modern house.

With its powder coated zintec steel smooth white maintenance free finish. The loft hatch requires no painting and projects into the ceiling space a mere 8mm.
Once the drop down loft door is opened, all size options have a minimum clear opening to satisfy building regulations, therefore compliant to NHBC regulations as Chapter 7.2 Section D14 “to a minimum clear opening of 520mm in any direction”. This will assist if you have catered for storing sizeable items in the loft.
The loft access hatch is insulated with an exposed fire resistant mineral slab insulation to comply with the building regulations 0.35 “U” value.
The SD loft hatch is compatible with our entire range of loft ladders.
The loft door has a 25mm flange that projects beyond the fitting size, The SD loft hatch has concealed hinges and fixings contributing towards its unobtrusive look.
The loft access door has a neat tri-drive budget lock with an integral chamfer for a smooth closing action. A secure radial pin tumbler lockable version is available (SDL).
The loft panel is fully draught sealed between the door and frame, virtually eliminating warm air leakage and vapour ingress, it also assists with ease of decoration of the ceiling up to the edge of the loft access trap frame.

The SD loft access hatch box packaging is 100% recycled & recyclable.

  • 1 Hour Fire Rated – Tested to “Part B” BS EN 1634-1:2008 and BS EN 1634-2:1999, including 1Hr Fire Rating on the insulation by virtue of integrity
  • Complies with Part L & NHBC Building Regulations
  • 5 Sizes to fit ceiling cut outs of: 550 x 550mm, 555 x 800mm 600 x 600mm, *555 x 755mm & 900 x 600mm all hinged on short side (where applicable)
  • Key lockable option available
  • 600 x 600 & *555 x 755 Air tested in a UKAS accredited test house with superb result of 0.76m3/hr @ 50Pa
  • Airtight tri-drive lock (and key)
  • Unrivalled insulation properties @ 0.32 “U” value (Exceeds Part L Building Regs)
  • Optional pole to operate budget lock only

*Note actual hatch size is 536 x 736mm to fit a ceiling cut out of 555 x 755mm when lined with 9.5mm fireboard. Other sizes do not need lining with fireboard.